The Parameters dialog lets you change some of the features of MultiSpool.
Enable the spooler
Simply turns on ond off the spooling of the print files. If not checked the printing process behaves in the old manner even when in MultiFinder.
Spool when not in MF
If enabled, MultiSpool will save the print files when you print without MultiFinder. The spooled files may then be printed in the background when you are in MultiFinder. Note that if you switch to the MultiFinder the printing will be suspended so you must start it from the Options dialog.
Start suspended
If enabled, MultiSpool will start in a suspended state also when you boot directly in the MultiFinder.
Enable the Hot-Keys
If checked, the 4 hot keys defined are enabled.
Show icon on menu bar
If enabled, a small icon on the menu bar will inform you on the progress of the printing.
Spooler memory
Defines the memory reserved to the background spool printing application. This value depends on the printer driver that you are using. Raise this value if you get an out of memory error from the background spool printing application.
Pause/cont. - Abort - Parameters - Options
Lets you specify the Hot-Key related to every function. To disable a particular Hot-Key press the space bar.
OK
Exits from the dialog and accepts the current settings.